2005 expedition fuel pump driver module location

Run/Accessory - Wipers, Instrument cluster, Audio (2005-2008 - XL/STX) Gently pull on the cover to make sure it is seated properly.

To reinstall the fuse box cover, place the top part of the cover on the fuse panel, then push the bottom part of the cover until you hear it click shut. To remove the fuse box cover, place a finger behind the PULL tab and your thumb above the PULL tab as shown in the illustration, then pull the cover off. Remove the trim panel and fuse box cover to access the fuses. The power distribution box is located under the right-hand side of the instrument panel. If a fuse blows again contact a qualified service center.Use always an intact fuse of the same color. Never replace a broken fuse with anything other than a new fuse.Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. Always replace a fuse with one that has the specified amperage rating.Always disconnect the battery before servicing high current fuses.Before replacing fuses check that the key has been removed from the ignition and that all the services are switched off and/or disengaged.

2005 expedition fuel pump driver module location